Altec 886A tweeters

[jeepy]

Hello, I need two tweeters for the 886A. Any chance to find a pair somewhere or even equivalent paper cone tweeters?:thankU: jeepy

[Old Guy]

Originals will be almost impossible.

Best shot is a decent replacement.

These you may be able to use

https://www.madisound.com/store/prod...oducts_id=9046..

maybe?

http://www.parts-express.com/pe/show...umber=264-1028
4 ohm, will need series resistor I would try this one with a 4ohm non inductive in series http://www.parts-express.com/pe/psho...rtnumber=004-4

This is close to a drop in, but dunno if any good...cheap enough to throw away....
http://www.parts-express.com/pe/show...number=279-024

Personally the middle one the VIFA looks best to me....you pays yer money and you takes yer choice...

[jeepy]

Originals will be almost impossible.

Best shot is a decent replacement.

These you may be able to use

https://www.madisound.com/store/prod...oducts_id=9046..

maybe?

http://www.parts-express.com/pe/show...umber=264-1028
4 ohm, will need series resistor I would try this one with a 4ohm non inductive in series http://www.parts-express.com/pe/psho...rtnumber=004-4

This is close to a drop in, but dunno if any good...cheap enough to throw away....
http://www.parts-express.com/pe/show...number=279-024

Personally the middle one the VIFA looks best to me....you pays yer money and you takes yer choice...

I agree with you regarding the VIFA. I will make a try, they are not expensive!:thankU: